Glaco Graphite Blade

Simply wiping when the glass is dry powerfully repels rain and provides comfortable visibility. The secret is silicone rubber containing concentrated Glaco compounds. When used on glass surfaces coated with Glaco, it restores the deteriorated water-repellent film and prolongs the rain repellent effect. Furthermore, the newly developed graphite coating drastically reduces juddering and squeaking. Glaco Graphite Blades are equipped with a Japanese-made high-rigidity frame that prevents judder during operation and ensures stable wiping.

Hydrophobicity

Wiping power

Aesthetics

Economy

Contents: 1

Glaco Graphite Blade Technology

Smooth wiping: High-grade natural rubber with excellent elasticity and adhesion to glass surfaces is used, and high-precision cutting realizes high wiping performance.

High-density graphite coating: Graphite is a crystal of carbon, and is characterized by low frictional resistance. By coating the rubber surface with fine particles of graphite, friction with the glass surface is drastically reduced, resulting in smooth and quiet wiping.

Stable wiping performance from a strong frame: Glaco Graphite Blades have a Japanese-made high-rigidity frame that prevents judder during operation and ensures stable wiping.

How to use Glaco Graphite Blade

Before replacement

After opening the package, check that the wiper rubber of this product has not come off and that there are no deformed or missing parts.
Stop the engine and make sure the wiper switch is OFF.
Remove traffic film and dirt from the glass beforehand.
Please work on the glass and body with a soft cloth or similar material to prevent scratches.

STEP 01

Stand the arm up.

Stand the wiper arm up and tilt the blade slightly so that the wiper rubber faces upward.
- For retractable arms, refer to the work instructions in the car manual before proceeding.
STEP 02

Remove the blade.

Slide the wiper blade while pressing the stopper to remove it.

How to remove the covered version

Raise the cover section and slide the wiper blade to remove it.
STEP 03

Install new blades and you are done.

Slide the clip into the U-shaped hook on the wiper arm until it clicks into place.
- After installation, operate the wipers approximately 10 times to confirm that they are properly installed and that there is no contact with the body or other parts of the vehicle.