Glaco Wiper Super Water Repellent Blade

Simply wiping when the glass is dry powerfully repels rain and provides comfortable visibility. The secret is silicone rubber containing concentrated Glaco compounds. When used on glass surfaces coated with Glaco, it restores the deteriorated water-repellent film and prolongs the rain repellent effect. Furthermore, the newly developed graphite coating drastically reduces juddering and squeaking. Glaco Wiper Super Water Repellent Blades are equipped with a Japanese-made high-rigidity frame that prevents judder during operation and ensures stable wiping.

Hydrophobicity

Wiping power

Aesthetics

Economy

Contents: 1

Glaco Wiper Super Water Repellent Blade Technology

Increase repellency just by wiping: Just by wiping dry glass, a powerful repellent coating is formed.

Forms a coating film that repels rain: With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Newly developed "S・L・F coating" realizes sharp wiping: To further improve the characteristics of low-friction graphite, a newly developed "S・L・F Coat," which contains fluoroplastic, is evenly coated on the rubber surface. Unpleasant chattering and squeaking have been drastically reduced, and sharp operation without leaving any residue has been realized.

Stable wiping performance realized by a strong frame: Glaco Wiper Super Water Repellent Blade has a Japanese-made high-rigidity frame that prevents judder during operation and ensures stable wiping.

How to use Glaco Wiper Super Water Repellent Blade

Before replacement

After opening the package, check that the wiper rubber of this product has not come off and that there are no deformed or missing parts.
Stop the engine and make sure the wiper switch is OFF.
Remove traffic film and dirt from the glass beforehand.
Please work on the glass and body with a soft cloth or similar material to prevent scratches.

STEP 01

Stand the arm up.

Stand the wiper arm up and tilt the blade slightly so that the wiper rubber faces upward.
- For retractable arms, refer to the work instructions in the car manual before proceeding.
STEP 02

Remove the blade.

Slide the wiper blade while pressing the stopper to remove it.

How to remove cover type

Raise the cover section and slide off the wiper blade.
STEP 03

Install new blades and you are done.

Slide the clip into the U-shaped hook on the wiper arm until it clicks into place.
- After installation, operate the wipers approximately 10 times to confirm that they are properly installed and that there is no contact with the body or other parts of the vehicle.