Glaco Wiper Power Blade Snow Type

Glaco Wiper Power Blade Snow Type is designed to provide stable wiping performance even at high speeds, while maintaining the outstanding water-repellent performance of Glaco Wipers.
Even in sub-zero temperatures, a water-repellent film is formed on the entire surface of the glass after approximately 3 minutes of operation, preventing snow and ice from sticking to the glass and preventing snow and frost from freezing over in the early morning. It also prevents snow and ice from sticking to the glass and prevents snow and frost from freezing over in the early morning. It also prevents dirt from sticking to the glass from snow melting chemicals and mud splashes that tend to occur when driving.
The aerodynamic structure prevents the wipers from lifting even when driving at high speeds or in strong winds or snowstorms, ensuring stable wiping performance. The highly rigid design frame firmly pushes away heavy and wet snow, and silicone rubber for snow with excellent cold resistance is used. Of course, the frame is covered by a hood to prevent snow accumulation and freezing, maintaining wiping performance.

Hydrophobicity

Wiping power

Aesthetics

Economy

Contents: 1

Glaco Wiper Power Blade Snow Type Technology

Glaco repellency and aerodynamic power!: These wipers repel snow, ice, and mud splatter and are resistant to low temperatures, high speeds, and snowstorms, providing comfortable visibility on snowy days.

Forms a coating film that repels snow and ice: Even in sub-zero temperatures, a water-repellent film is formed on the entire surface of the glass after approximately 3 minutes of operation, making it difficult for snow and ice to stick to the glass and inhibiting the freezing of snow and frost that occurs in the early morning. It also prevents snow and ice from sticking to the glass and prevents snow and frost from freezing over in the early morning. It also prevents dirt from sticking to the glass from snow melting chemicals and mud splashes that tend to occur when driving.

How to use Glaco Wiper Power Blade Snow Type

Before replacement

After opening the package, check that the wiper rubber of this product has not come off and that there are no deformed or missing parts.
Stop the engine and make sure the wiper switch is OFF.
Remove traffic film and dirt from the glass beforehand.
Please work on the glass and body with a soft cloth or similar material to prevent scratches.

STEP 01

Stand the arm up and remove the blade.

Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.
STEP 02

Install new blades.

Slide the clip over the U-shaped hook on the wiper arm and then close the cover, making sure that it clicks into place at this time.
STEP 03

Installation is complete.

After installation is completed, check that (1) the wipers are properly installed by operating them approximately 10 times, (2) the wipers are not in contact with the body, etc., and (3) the spoiler is not in contact with the arms or body.