Glaco Wiper New Aero Design

This is a 3D aerodynamic wiper blade with sleek design, which is part of the popular Glaco Wiper series with its strong water repellent power and high wiping performance. A sleekly-shaped frame, which is resistant to juddering and demonstrates stable wiping performance, is fitted with an aerodynamic cover, eliminating any gaps that detract from the appearance of the blade and creating a beautiful, integrated design. Of course, simply wiping when the glass is dry will strongly repel rain and provide a comfortable field of vision.

Hydrophobicity

Wiping power

Aesthetics

Economy

Contents: 1

Glaco Wiper New Aero Design Technology

Glaco Wiper New Aero Design: This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain: With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!: The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

How to use Glaco Wiper New Aero Design

Before replacement

After opening the package, check that the wiper rubber of this product has not come off and that there are no deformed or missing parts.
Stop the engine and make sure the wiper switch is OFF.
Remove traffic film and dirt from the glass beforehand.
Please work on the glass and body with a soft cloth or similar material to prevent scratches.

STEP 01

Stand the arm up.

Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.
STEP 02

Install new blades.

Open the cover and slide the clip into the U-shaped hook on the wiper arm until it clicks into place, then close the cover.
STEP 03

It gives your car a stylish look.

After installation is completed, check that (1) the wipers are properly installed by operating them approximately 10 times, (2) the wipers are not in contact with the body, etc., and (3) the spoiler is not in contact with the arms or body.